Pool Hot Tub Heater 3KW/2KW Swimming Pool & SPA Hot Tub El Ectric Water Heater Thermostat(2KW)

The initial set temperature: Thermostat equipped with ultra-high temperature protection thermostat switch, thermostat to limit overheating and protect users against danger, however, users should be done after the installation is complete, the first under the premise of safety checks to ensure that the operation of the thermostat's normal function,By using the tub filled with water to a suitable level and start the system automatically checks and let the system run until the thermostat temperature stabilized at the highest level and display lights go out, use an accurate thermometer to measure the water temperature should be at 40 °CThermostat operation is fully automated, clockwise, the heating is on, indicator light, temperature reaches a preset temperature, will remain at that temperature.Specifications:Power: 3KW/2KWCurrent:13.6AFrequency: 50/60HzPhase parameters: single phaseIntake: 50mm, outlet: about 32mmHeating range: About 1~2m³Note:Thermostat outlet to the bath tub in the middle of the pipe or valve or check valve can not be installed.Thermostats are not powered, so they must be equipped with circulating pumps to use.Can not be used alonePackage Included:1 x 3KW SPA Heater

• The thermostat can be maintained within a temperature not exceeding 40 °C (104 °F) range. If cold water is started, will be 6 ~ 8 °C / h elevated temperatures.
• Automatic heating:
• Thermostat will first reach the preset temperature, then stop working until the temperature dropped a few degrees, the thermostat automatically turns on.
• Ultra-high temperature protection switch and reset button:
• Ultra-high temperature (over 49 °C), ultra-high temperature switch will automatically trip (power off).